Practice Problems

New problems in the same style as Quiz 7, ordered from easiest to hardest. Work each one on paper first, then open the Hint if you are stuck, and finally the Solution.

P1. Gain in dB warm-up

Convert each passband gain to a linear gain $K$: (a) 20 dB (b) 14 dB (c) 6 dB. Then (d): what is $|H|$ at the cutoff if $K=10$?

Hint$K=10^{\text{dB}/20}$. At cutoff, gain is $K/\sqrt2$.
Solution (a) $10^{1}=10$ (b) $10^{0.7}=5.01$ (c) $10^{0.3}=2.00$ (d) $10/\sqrt2=7.07$ (that is $20-3=17$ dB).

P2. Analyze a first-order HPF Fig 15.4

The high-pass circuit of Fig 15.4 has $R_1=2$ kΩ, $R_2=10$ kΩ, $C=0.1\ \mu$F. Find $H(s)$, $K$, $\omega_c$, $f_c$, and $|H|$ at $\omega_c$.

HintHPF: $K=R_2/R_1$ and $\omega_c=1/(R_1C)$, because $C$ is in series with $R_1$.
Solution $K=10/2=5$. $\;\omega_c=\dfrac{1}{2000\times0.1\times10^{-6}}=5000$ rad/s. $\;f_c=5000/2\pi=795.8$ Hz. $$H(s)=-5\frac{s}{s+5000}$$ At $\omega_c$: $|H|=5/\sqrt2=3.54$.

P3. Design a first-order LPF Fig 15.1

Design a first-order active low-pass filter with $f_c=1$ kHz and passband gain magnitude 5 using a 10 nF capacitor.

HintFind the resistor that touches the capacitor first ($R_2=1/\omega_cC$), then use $K=R_2/R_1$.
Solution $\omega_c=2\pi(1000)=6283$ rad/s. $$R_2=\frac{1}{6283\times10\times10^{-9}}=15.92\text{ k}\Omega,\qquad R_1=\frac{R_2}{5}=3.18\text{ k}\Omega$$ Circuit: $R_1$ at the input, $R_2\parallel C$ in the feedback, $+$ grounded.

P4. Read a band-pass transfer function

$$H(s)=\frac{-400s}{s^2+200s+10^6}$$ Identify the filter, then find $\omega_o$, $\beta$, $Q$, $K$, $\omega_{c1}$, $\omega_{c2}$.

HintMatch $k\frac{bs}{s^2+bs+c}$. Write the numerator as $k\cdot(200s)$.
Solution $s\to0$ and $s\to\infty$ both give 0, so it is a band-pass.
$\omega_o=\sqrt{10^6}=1000$ rad/s, $\beta=200$ rad/s, $Q=1000/200=5$, $K=-400/200=-2$. $$\omega_{c1,2}=\mp100+\sqrt{100^2+1000^2}=\mp100+1005\;\Rightarrow\;\omega_{c1}=905,\ \omega_{c2}=1105\text{ rad/s}$$ Check: $1105-905=200=\beta$ ✓, and $\sqrt{905\times1105}\approx1000$ ✓.

P5. Read a band-reject transfer function

$$H(s)=\frac{3(s^2+2500)}{s^2+20s+2500}$$ Type, passband gain, $\omega_o$, $\beta$, $Q$, cutoffs?

Solution Form $k\frac{s^2+c}{s^2+bs+c}$, so it is a band-reject. $k=3$ (gain 3 at both ends), $\omega_o=\sqrt{2500}=50$ rad/s, $\beta=20$ rad/s, $Q=2.5$.
$\omega_{c1,2}=\mp10+\sqrt{100+2500}=\mp10+51$, so the cutoffs are $41.0$ and $61.0$ rad/s.

P6. Which filter is it?

$$H(s)=\frac{10s^2}{s^2+141.4s+10^4}$$ Name the type, its order, its high-frequency gain, its corner frequency, and say whether it is Butterworth.

HintNormalize: is the denominator $s^2+\sqrt2\,\omega_cs+\omega_c^2$?
Solution $s\to0$: 0. $s\to\infty$: $10$. So it is a 2nd-order high-pass with gain 10 and $\omega_c=\sqrt{10^4}=100$ rad/s.
$\sqrt2\times100=141.4$ ✓, so the denominator is $s^2+\sqrt2\,\omega_cs+\omega_c^2$, which is the scaled 2nd-order Butterworth polynomial. Yes.

P7. Derive a band-pass (same shape as Quiz P3 / P4c)

Inverting op amp: input path $R_i=1$ kΩ in series with $C_i=1\ \mu$F; feedback $R_f=10$ kΩ in parallel with $C_f=10$ nF. Find $H(s)$, type, $\omega_o$, $\beta$, $K$, $Q$, and the cutoffs.

Hint$Z_i=\frac{1+sR_iC_i}{sC_i}$, $Z_f=\frac{R_f}{1+sR_fC_f}$, $H=-Z_f/Z_i$. Here $R_iC_i=10^{-3}$ and $R_fC_f=10^{-4}$.
Solution $$H(s)=-\frac{R_fC_i\,s}{(1+sR_fC_f)(1+sR_iC_i)}=\frac{-0.01s}{(1+10^{-4}s)(1+10^{-3}s)}$$ Factor: $(1+10^{-4}s)(1+10^{-3}s)=10^{-7}(s+10^4)(s+10^3)$, so $$H(s)=\frac{-10^5s}{(s+1000)(s+10{,}000)}=\frac{-10^5s}{s^2+11{,}000s+10^7}$$ Band-pass. $\omega_o=\sqrt{10^7}=3162$ rad/s, $\beta=11{,}000$ rad/s, $K=-10^5/11{,}000=-9.09$, $Q=0.287$.
$\omega_{c1,2}=\mp5500+\sqrt{5500^2+10^7}=\mp5500+6344$, so the cutoffs are $844$ and $11{,}844$ rad/s.
Note: $K$ is a bit less than $R_f/R_i=10$ because the two corners (1000 and 10,000) are only a decade apart.

P8. Prototype scaling

Scale the prototype first-order LPF (1 Ω, 1 Ω, 1 F) to $f_c=2$ kHz using a 5 nF capacitor. What are the resistors?

Hint$k_f=\omega_c$. Pick $k_m$ so $C'=\frac{1}{k_mk_f}=5$ nF.
Solution $k_f=2\pi(2000)=12{,}566$. $\;k_m=\dfrac{1}{k_fC'}=\dfrac{1}{12{,}566\times5\times10^{-9}}=15{,}915$.
Both resistors become $15.9$ kΩ. (Check: $\frac{1}{R'C'}=\frac{1}{15{,}915\times5\times10^{-9}}=12{,}566$ rad/s ✓.)

P9. Cascade band-pass design

Design a broadband band-pass filter with $f_{c1}=100$ Hz, $f_{c2}=10$ kHz and passband gain 10, using $0.1\ \mu$F capacitors. Also find the center frequency.

HintLow-pass sets the upper cutoff, high-pass sets the lower cutoff. Add an inverting stage for gain.
Solution LPF stage: $R_L=\dfrac{1}{2\pi(10^4)(10^{-7})}=159.2\ \Omega$ (both LPF resistors, so unity gain).
HPF stage: $R_H=\dfrac{1}{2\pi(100)(10^{-7})}=15.92$ kΩ (both HPF resistors).
Gain stage: $R_f/R_i=10$, e.g. $R_i=1$ kΩ and $R_f=10$ kΩ.
Center: $f_o=\sqrt{100\times10{,}000}=1000$ Hz (geometric mean, not 5050 Hz!).

P10. Parallel band-reject design

Design a broadband band-reject filter with $\omega_{c1}=500$ rad/s, $\omega_{c2}=8000$ rad/s and passband gain 2, using $0.2\ \mu$F capacitors. What is $\omega_o$?

Solution LPF sets the lower cutoff: $R_L=\dfrac{1}{500\times0.2\times10^{-6}}=10$ kΩ.
HPF sets the upper cutoff: $R_H=\dfrac{1}{8000\times0.2\times10^{-6}}=625\ \Omega$.
Summing amp: $R_f/R_i=2$, e.g. $R_i=1$ kΩ and $R_f=2$ kΩ.
$\omega_o=\sqrt{500\times8000}=2000$ rad/s.

P11. Butterworth order from a spec

A Butterworth LPF must be at −3 dB at $\omega_p=1000$ rad/s and at most −40 dB at $\omega_s=5000$ rad/s. What order $n$?

Solution $$n\approx\frac{-0.05A_s}{\log_{10}(\omega_s/\omega_p)}=\frac{-0.05(-40)}{\log_{10}5}=\frac{2}{0.699}=2.86$$ Round up: $n=3$. (The exact formula with $\sigma_p,\sigma_s$ gives 2.863, the same answer.)

P12. 4th-order Butterworth LPF

Design a unity-gain 4th-order Butterworth LPF with $f_c=500$ Hz using 5 kΩ resistors.

Hint$(s^2+0.765s+1)(s^2+1.848s+1)$: two Fig 15.21 cells, each with $C_1=2/b_1$ and $C_2=1/C_1$. Then scale.
Solution Prototype cell 1 ($b_1=0.7654$): $C_1=2.613$ F, $C_2=0.3827$ F.
Prototype cell 2 ($b_1=1.8478$): $C_1=1.082$ F, $C_2=0.9239$ F.
Scale: $k_f=2\pi(500)=3141.6$, $k_m=5000$, $k_mk_f=1.571\times10^7$.
  • Cell 1: $C_1=166.4$ nF, $C_2=24.4$ nF
  • Cell 2: $C_1=68.9$ nF, $C_2=58.8$ nF
  • All resistors 5 kΩ
Each cell has gain +1, so the total gain is 1 and no gain stage is needed.

P13. Narrowband band-pass design (Fig 15.27)

Design for $\omega_o=10{,}000$ rad/s, $Q=5$, $|K|=4$, using $C=0.01\ \mu$F.

HintPrototype: $R_1=Q/K$, $R_2=Q/(2Q^2-K)$, $R_3=2Q$. Then $k_f=\omega_o$, and choose $k_m$ so that $C=1/(k_mk_f)$.
Solution Prototype: $R_1=5/4=1.25\ \Omega$, $R_2=5/(50-4)=0.1087\ \Omega$, $R_3=10\ \Omega$.
$k_f=10^4$. $\;k_m=\dfrac{1}{10^4\times10^{-8}}=10^4$.
$R_1=12.5$ kΩ, $R_2=1.087$ kΩ, $R_3=100$ kΩ.
Check: $\beta=\frac{2}{R_3C}=\frac{2}{10^5\times10^{-8}}=2000=\omega_o/Q$ ✓. $\;K=-\frac{R_3}{2R_1}=-4$ ✓.

P14. Twin-T notch design

Design a twin-T notch at 1 kHz with $Q=5$ using $C=10$ nF. Find $R$ and $\sigma$.

Solution $R=\dfrac{1}{\omega_oC}=\dfrac{1}{2\pi(1000)(10^{-8})}=15.92$ kΩ.
$Q=\dfrac{1}{4(1-\sigma)}=5\Rightarrow1-\sigma=0.05\Rightarrow\sigma=0.95$.
The output divider is therefore $(1-\sigma)R=0.05R$ on top and $\sigma R=0.95R$ on the bottom.

Ready? Take the Practice Quiz.